Practice of bathroom glass partition purchase of b

2022-07-22
  • Detail

The bathroom glass partition is the first partition method used most in the bathroom at present. Its main function is to distinguish the space area and make better use of the space. It is mainly because the bathroom glass partition has the advantages of good disassembly and assembly, fast installation, and repeated use, which is deeply loved by consumers

the bathroom glass partition is the first partition method used most in the bathroom at present. Its main function is to distinguish space areas and make better use of space. It is mainly because the bathroom glass partition has the advantages of good disassembly and assembly, fast installation, and repeated use, which is deeply loved by consumers. Next, the editor will introduce the practice of bathroom glass partition and the purchase of bathroom glass partition

practice of bathroom glass partition

1. When making bathroom glass partition, first lay floor tiles and wall tiles, and then make the partition with the specified size. However, it should be noted that the upper and lower walls may have errors. Only glass partitions customized according to the actual size can be installed and used

2. When laying tiles, install the sewer first, and then install the floor drain. Then install the door frame when installing the partition. The door frame can be used to block water. If there is no door frame, install the threshold stone. The threshold stone should be 1.5-2 cm higher than the ground, otherwise the shower water flowing out from under the door cannot achieve the purpose of dry and wet zoning

3. When installing the bathroom glass partition, it is best not to use the sliding track, because the water and dust in the sliding track are difficult to clean, and will stink after a long time, affecting the indoor air

4. Pay attention to making bathroom glass partitions. Don't choose jade sand as the glass material, because jade sand glass will become transparent after encountering water, which is very inconvenient

5. After the bathroom glass partition is completed, it should also be paid attention to when using it. In order to prolong the service life, wipe it with a dry cloth after bathing, and do not leave any water stains. If there are water stains, you can gently spray white vinegar on the glass surface, and then wipe it with a cloth after a period of time

bathroom glass partition purchase

1. Look at the material: the general material is easy to change color, the surface treatment is also relatively poor, and the high-quality material is solid and good-looking

2. Look at roller skating: high-quality roller skating has good sealing performance in both material and wheel seat, and the wheel is not easy to water. The wheel slide fits closely with the guide rail, and the gap is small, so it will not fall off when impacted

3. The color of bathroom glass partition should be consistent with the style of bathroom. Some consumers like partition doors with patterns on the appearance. This kind of decorative effect is good and gives people beautiful enjoyment; But there are also some more traditional people who choose opaque cloth partitions, so that others can use the bathroom when taking a bath

editor's summary: This is the introduction about the practice of bathroom glass partition and the purchase of bathroom glass partition. I hope it will be helpful to you. If you want to know more, you can pay attention to information

成都精神医院

济南儿科医院

成都男科医院

上海胎记疤痕医院

Copyright © 2011 JIN SHI